500W Solar System with 40W Solar Module for Outdoor Use with Continuous 500W Pure Sine Wave Inverter LCD Display with 2pcs Bulb

Availability: In stock

$335.00 $298.15

Product Description


500W Solar System for Outdoor Use with Continuous 500W Pure Sine Wave Inverter LCD Display with 2pcs Bulb Lights
U sage notice:
1, charge full your battery first before put in it.
2, if don’t use the device long time please keep the battery not discharge too much,which led display show more than 60%.
Features
1, the product design is reasonable, without oil, steam, coal and other fuels, direct sunshine power supply, environmental protection, suitable for use in tourism, home, grassland pastoral, field operations, agriculture and forestry Villa, island fishing post guard post without electricity area lighting use.
2, solar panels used for efficient polycrystalline silicon.
3, the system has a power detection function, allowing you to keep informed of the battery status, but also designed with electricity compensation charging function, in the absence of sunshine weather can also be charged to ensure the required power.
4, the device set DC12V-AC220V dual voltage socket, suitable for a variety of small household appliances.
5, with a protection of over discharge over discharge for lead acid deep cycle batteries.
6, With AC power charging function, in the absence of sunshine rainy weather, you can use electricity charging, to ensure normal electricity.
Instructions for use
1, The LCD screen display battery’s voltage, remaining power, charging current, discharge current and load mode, the controller temperature and other information, when it show 100, that indicates full charged, display below 40,indicates lack of power and need to be charged, display 20,indicates no power,should stop working immediately and charge full before use again.
2, when the LCD display show 0, must stop using immediately and the device can not charge itself, so must charge it by AC power for 10 hours,When the battery is fully charged, the system can be unprotected and everything is back to normal.
Parameters:
Material of solar module: Polysilicon
Solar power: 18V,20W*2
Solar charge controller: 12V/24V 10A
Inverter: 12V peak 1000W pure sine wave inverter (continuous 500W)
Output power: AC 100-110V OR 200-240V,DC 12V,USB 5V
Size: 380mm*445mm*190mm
Protection of over-charge voltage:14.4V ± 0.2V ;
Over-charge recovery voltage:13.6V ± 0.2V ;
Protection of over-discharge voltage : 10.8V ± 0.1V ;
Over-discharge recovery voltage:12.2V ± 0.1V ;
Rated DC loads:20A ;
Rated AC loads: 2A ;
Max charge current:10A ;
No-load current:
Indicators
(1), Open the case,toward the sunlight, solar charge indicator turn to red,means normal charge, close the case,the solar charge indicator turn off;
(2) When the DC output indicator turn on, indicates using loads, if off, indicates stop using the loads,When the DC output indicator is flashing,it indicates short circuit protection.
(3) if you have other solar panel,you can connect them from External solar panel socket in the device

  • Unit Type: Set
  • Package Weight: 12.0kg (26.46lb.)
  • Package Size: 51cm x 53cm x 28cm (20.08in x 20.87in x 11.02in)

  • Voltage: 110V, 220V
  • Brand Name: WORKSTAR
  • Model Number: 500W

Reviews

Write Review

Related products

Best